Icoustic Thermocon®
Icoustic Thermocon®
Icoustic Thermocon®, Icoustic Thermocon® FC and Icoustic Thermocon® SB are sound absorbing products that are sprayed on in spaces where the reduction of reverberation time and sound level and improving the acoustics are the aim.
Finishes
Icoustic ThermoCon®
Rough spray structure
Icoustic ThermoCon® SB
Medium-fine spray structure
Icoustic ThermoCon® FC
Fine spray structure
Icoustic ThermoCon® FC-TR
Fine spray structure
Characteristics
Apply
Icoustic ThermoCon® is a decorative and sound absorbing product that can be sprayed as a finish onto ceilings and walls of metal, concrete, plaster, wood and other materials. If there is enough surface area to be covered, almost any colour can be used.
The Icoustic ThermoCon® to be sprayed can be used as a finish for smooth or curved surfaces with the original shape retained in public spaces, indoor swimming pools, sports halls, industrial spaces, churches, sound studios, theatres, classrooms, university halls, day care centres and any other location in order to control reverberation time, with the result being an increase in acoustic comfort, the sound level being decreased and clarity of speech optimised.
Thickness of layer
Icoustic ThermoCon® : 10-15-20-25-35-45 mm
Icoustic ThermoCon®, FC: 10-15-20-25 mm
Icoustic ThermoCon® SB: 10-15-20-25 mm
Colour
Icoustic ThermoCon® and Icoustic ThermoCon® SB: white, black, light grey and dark grey
Icoustic ThermoCon® FC: white
Other colours available on request.
Mechanical properties
The sprayed materials are impact-resistant, but otherwise their mechanical properties are limited. Where necessary, a loadable coat can be applied.
Cleaning and maintenance
The acoustic plaster is anti-static and inorganic, so no maintenance required and it’s very easy to repair. The system is highly resistant to both humidity and UV-exposure.
Surface dust and dirt can be vacuumed off using a soft brush attachementor blown off using pressurized air.
Sound absorption
When you apply Icoustic ThermoCon® in various thicknesses you can regulate the acoustics of the space. For an overview of the sound absorption measurements for Icoustic ThermoCon®, please see the table.
Fire rating
Fire class in accordance with BS EN ISO 11925-2 and EN 13823: B-s1, d0
Thermal properties
Heat transfer coefficient = 0.032 W/(mWK).
Indoor climate
Microorganisms cannot grow in the acoustic plaster system. The system is odor free and highly resistant to humidity and UV-exposure.
Manufactering
Icoustic ThermoCon® is manufactured by International Cellulose Corporation, Houston, TX, USA, the global leader in sprayed acoustic plasters. Icoustic Sound is the exclusive European licence-holder for Icoustic ThermoCon® .
Installation guidelines
Preparation
The substrate must be airtight, waterproof, clean, dry and free of grease. Any seams and holes in the surface as well as the joins between walls and the ceiling must be sealed in advance in order to prevent airflows through the Icoustic ThermoCon® layer. Primer must be applied in advance to untreated wood and metal as well as heavily fouled substrates (nicotine) in order to prevent bleed-throughs.
Local areas can be repaired that have become damaged.
Profiles
A delineation must be located at the end of the area to be sprayed, against a wall or open window, for example. In the absence of such a delineation, a profile or similar device must be attached to the surface.
Accredited installer
Icoustic ThermoCon® is installed in-house by Icoustic Sound.
Strengths
Cleaning & maintenance
The acoustic plaster is anti-static and inorganic, so no maintenance required and it’s very easy to repair. The system is highly resistant to both humidity and UV-exposure.
Appareance
ThermoCon® is an industrial quality product while ThermoCon® FC and ThermoCon® SB are known for their aesthetic quality, thanks to the fine fibre structure.
Colour & light reflectance
ThermoCon® and ThermoCon® SB: white, black, light grey and dark grey
ThermoCon® FC: white
Other colours available on request.
Fire rating
Fire class in accordance with BS EN ISO 11925-2 and EN 13823: B-s1, d0
Resistance
The sprayed materials are impact-resistant, but otherwise their mechanical properties are limited. Where necessary, a loadable coat can be applied.
Thermal properties
Heat transfer coefficient = 0.032 W/(mWK).
We think of the environment
The ThermoCon systems contain 80% recycled material and with one action several properties are achieved. Just to name a few: thermal insulation, acoustic properties, light reflexion, etc ... making the use of other products superfluous and the ecological footprint reduced.
Downloads
References
An acoustics or fireproofing project starts with a careful concept. If you have any questions or are thinking of a specific project, contact us and we’ll come by.
Icoustic uses cookies to optimize your user experience. By clicking 'okay' or by continuing to browse this website, you agree to placing these cookies. Would you like to know more about cookies or change your cookie settings for this website? Go on and read our privacy policy. Click here for our privacy policy.