Icoustic Fade® Seamless Acoustic Ceilings
Icoustic Fade® Seamless Acoustic Ceilings
THE ICOUSTIC FADE® ACOUSTIC PLASTER SYSTEM
The Icoustic Fade® Acoustic Plaster System is a high-quality plastering system that absorbs unwanted noise in a wide range of environments.
As an acoustic solution applied to walls and ceilings, its highly absorbent qualities allow for optimum acoustic control in large, commercial spaces.
Icoustic Fade® plus+
Ultra smooth
An ultra-smooth, fine grain super white finish. Sanded or trowelled to achieve a highly aesthetic acoustic solution.
Standard colour
NCS S 0300-N
Light reflectance
83 %
Icoustic Fade® albus
Smooth
A smooth, medium grain and pure white finish. Sanded or trowelled to achieve a highly aesthetic acoustic solution.
Standard colour
NCS S 0500-N
Light reflectance
81 %
Icoustic Fade® All colours
All colours
The plaster can be coloured in all RAL and NCS colours.
Characteristics
Direct installation
The acoustic board is installed directly onto a plasterboard, concrete or timber substrate with either approved adhesive or mechanically fixed with special Icoustic Fade® washers.
Direct-to-grid
The acoustic board is installed directly to a MF metal drywall grid system 400 mm c/c or similar with the special Icoustic Fade®washers.
Icoustic Fade® Acoustic Plaster without an acoustic board
The acoustic plaster is sprayed directly onto a primed plasterboard or concrete substrate to a total thickness of 3mm.
Installation guidelines
1. Acoustic board
The acoustic boards are installed to a suitable substrate with tight joints. Installation can be done mechanically with screws and special washers 400mm c/c or with an approved adhesive.
2. Self-adhesive fiberglass scrim tape
Scrim tape is applied to the joints.
3. Filling
Acoustic plaster is applied onto the scrim tape to level the surface. *
*This step may have to be repeated once the
plaster has dried out and until one has achieved
a completely levelled surface with no indents or
irregularities.
4. Filling
Washers, irregularities and indents
are filled with acoustic plaster to
level the surface. *
* Acoustic plaster on joints and washers can be
given a light sand when dry to remove any
irregularities.
5. Spraying
The acoustic plaster is spray applied in two
layers and should build 3-4mm in total.
6. Trowelling
Trowel both layers of acoustic plaster nicely.
7. smooth
A smooth, medium grain and pure white finish. Sanded or trowelled to achieve a highly aesthetic acoustic solution.
Accredited installer
Strengths
We think of the environment
We think of the environment
Up to 50 % recycled materials and no additives added to the plaster system.
We are involved in a tree-planting program - planting 1 tree for every 1m2 ceiling we produce.
Learn more here: trees.org
Colour & light reflectance
Standard colour: White
Light Reflectance Value as high as 83 %
The plaster is made from natural but inorganic
materials. With the plaster being anti-static the surface will keep its natural colour throughout the years.
The plaster can be coloured in all RAL and NCS colours.
Innovation & sustainable fabrication
The recipe is Swedish.
18 years down the line manufacturing of the product is still carried out in Scandinavia using only materials that originates from Europe. Icoustic is the exclusive distributor in the BNL, France, Germany and Spain.
Indoor climate
Microorganisms cannot grow in the acoustic plaster system. The system is odor free and highly resistant to humidity and UV-exposure.
Test data
NRC/AW up to: 1,0
(Class A)
Tested at SP Technical Research Institute of Sweden and Sound Research Laboratories in the UK.
Cradle to cradle
Fade was awarded the silver certificate of the quality label cradle to cradle.
Downloads
References